Industrial Utility Efficiency    

The Solution Air Atomizer from Martech

Cleaning, drying, and heating the atomizing air from your existing compressed air source can be accomplished with The Solution by Martech Services Company. 

Martech The Solution

The Solution is a complete compressed air system designed to clean, dry, and heat the atomizing air for today’s spray paint requirements.

 

According to Tom Wright, Martech Service Company’s director of sales and marketing, when placed near the point of use, The Solution will work with the existing compressed air source. The four-stage filtration is outfitted with an automatic moisture discharger. Then the clean air is further filtered to remove moisture content for super dry air. A controller, with digital outputs, allows user to set the temperature of the atomizing air up to 165 °F. The Solution is shipped complete with a 3/8” ID x 35-foot spray air hose.

“With the advent of waterborne paints becoming mandated by government agencies, the need for this type and quality of atomizing air is crucial,” says Wright.

The Solution is a complete compressed air system designed to clean, dry, and heat the atomizing air for today’s spray paint requirements. It is easy to use, simple to install, and affordable to maintain. The Solution is the result of years of experience and testing to bring The Solution to today’s needs for atomizing air, working well with both waterborne and solvent based paint systems.

 

For more information on The Solution contact Martech Services Company by calling 1-800-831-1525 or visit www.breathingsystems.com.